14
Using your Hob
To start cooking
1. After the hob be connected to the power supply.
Press and hold the ON/OFF control button for
about 3 seconds till you hear a “beep” to turn the
hob on. Now the hob enters into Standby mode, all heat
setting indicators and Timer setting indicators shows “-”
2. Place a suitable pan on the cooking zone you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3.
Select the cooking zone you wish to use.
-Slider Touch control models:
• adjust heat setting by sliding the slider control.
Notes:
1.
When first connected to the power supply and turned power on, the hob will
beep once, all indicators will light up for 1 second then go out.
2.
When the hob is in Standby mode, and not used for 1 minute, the electric
hob will automatically turn off, with the buzzer beeping once.
3.
To turn on hob, press the ON/OFF control button and hold on for about 3
seconds; To turn it off, press ON/OFF button again.
4.
The heating level can be adjusted from 0 to 9, default setting is level 5.
5.
The indicator for the selected zone will flash when the temperature is being
adjusted. After adjusting, the flashing will continue for 5 seconds then stop,
the setting is confirmed.
To turn off the Hob
1. You can turn the cooking zone off by selecting the zone (if you are using
more than one zone at a time) then adjust the heat setting to level 0 indicated
by “-“ sign
2. You can also turn the whole hob off by selecting the
ON/OFF control button.
Note: If there is a power outage during cooking, all settings will be cancelled.