Version 1.3
June 2018
Mounting the Range hood
Fit the ducting adaptor to the range hood by using the short screws supplied.
Provide an appropriate opening at the cupboard underside.
Model
Opening Dimension
CE620HSS
490mm x 260mm
CE920HSS
668mm x 260mm
Remove the front panel of the range hood by undoing the two visible screws located on both side‐ends. Eight mounting holes
around the unit then are accessible.
Lift the range hood and fit it to the cupboard opening made. Secure the unit by using long screws supplied. After that, refit the
front panel, then fit the two lights.
Page 7
