Version 1.3
June 2018
Installation Instruction
Equipment needed for installation:
Electric drill
Screwdriver
Measuring tape
Spirit level
Duct tape (for ductwork installation)
Jigsaw (for ductwork installation)
Prior to Product Installation
Make sure that the product power switch is OFF prior to installation.
Stainless steel panel could be damaged during installation if being knocked by tools. Protect the range hood with the
cardboard during installation.
A power outlet should be not more than 1500mm away from the range hood installation location.
This range hood can be installed in ducted or recirculation mode.
150mm and
120mm ducting adapters are supplied. Other ducting accessories are not provided by the manufacturer.
Ductwork installation must comply with local requirements and building codes.
Installation Location
When installing range hood, the lower edge of the unit must have a minimum of 600mm (650mm for gas cooker) distance
above the cooking range. The recommended position for the hood is 650mm above the hotplates.
Note:
The range hood installation shall comply with the minimum distance mentioned above or the distance specified in the gas hob
instruction manual, whichever is higher. Any installation above 750mm will compromise the range hood performance.
Page 5
