background image

13 

4.0  Frequently asked questions. 

 

      Can this system be used on a passenger car? 

      Yes 

 

      Can this system be used on a 6-wheel pickup? 

      Yes 

       

       Can this system be used on an RV? 

       Yes 

 

       Can this system be used on a 2-wheel motorcycle? 

       No 

 

      Can this system be used on an ATV or UTV?

 

      The answer is dependent on the application's recommended tire  

      pressure.   We do not recommend installing this system on any  

      application that requires a cold inflation tire pressure of less than 25 psi. 

 

      Can I install the Dill Retrofit TPMS kit myself with a basic set of  

        hand tools?

 

        It is not recommended. While the Dill Retrofit TPMS tire pressure display   

        unit can be installed in a vehicle with no tools, the process required to  

        install the internally-mounted tire pressure sensors should be performed  

        by a trained tire technician using tire servicing equipment. 

 

       

Can my trusted tire shop install your system?

 

       Most likely, yes. If your tire shop is familiar with factory Tire Pressure  

       Monitoring Systems on 2008+ model year vehicles, then installing the   

       Dill tire pressure sensors will not be a challenge. 

 

      

Can the Dill Trailer TPMS monitor the original factory sensors on  

      my tow vehicle?

 

       No, the tire pressure display unit can only be used to monitor the Dill  

       Retrofit TPMS tire pressure sensors included in the kit. However, Dill    

      Retrofit TPMS tire pressure sensors can be mounted in your tow  

        vehicle's wheel using a band if tire pressure monitoring is desired.       

      Please call for more info. 

 

      Will the Dill Trailer TPMS kit cause problems with my vehicle’s  

      factory TPMS?

 

       No 

 

      

Can my vehicle's factory TPMS read the Dill Trailer TPMS tire  

      pressure sensors?

 

      No 

 

 

 

 

Содержание Retrofit TPMS

















Отзывы: