6
CLEANING THE APPLIANCE
CLEANING THE MAIN UNIT
1:
Turn off the appliance and disconnect the charger (if attached).
2:
Wipe the external surface of the appliance with a soft damp cloth and allow to dry thoroughly.
3:
Do not use any detergents or
harsh cleaning agents to clean any parts of the appliance.
CLEANING THE FLOOR BRUSH
1:
Turn off the appliance, disconnect the charger (if attached)
and detach the floor brush from the Extension Tube.
2:
To clean the hair thread of the Floor Brush, rotate the release
button.
3:
Take out the Rotating Brush from the bottom of the Floor Brush.
4:
Clean the hair thread in the Floor Brush.
5:
Once done, place the Rotating Brush back into the Floor Brush
unit and lock it in place.
The Suction Inlet must be open and free of any obstructions at all times, otherwise the motor
will overheat and could be damaged.
CLEANING THE DUST CONTAINER AND FILTERS
1:
Turn off the appliance, disconnect the charger (if attached) and detach the main unit from
the Extension Tube.
2:
Detach the Dust Container and Dust Filter Assembly from the appliance.
3:
Empty the Dust Container by pressing the release button.
4:
Ensure that the HEPA filter is taken out regularly and cleaned. Try and get as much dust from
this after each use, and then clean the filter in water.
5:
Once the filters have dried completely, reattach them to the Dust Filter Assembly by rotating
and locking them in place.
If the appliance has lost suction or is not picking up small items, this indicates that the filters
need cleaning. This needs to be done on a regular basis to keep your appliance in good
condition.
Please do not use a washing machine to clean the Dust Filter Assembly. Make sure that the
Dust Filters have been completely air dried before it is placed back into the appliance.
Please remove the Floor Brush Cleaner from the appliance before cleaning the Floor Brush.
