1:
Turn off the appliance, disconnect the charger (if
attached) and detach the main unit from the Extension
Tube.
2:
Detach the Dust Container by pressing the release
button.
3:
Rotate the Dust Container Lid towards the “unlock”
marking. Remove the lid and take out the Dust Filter
Assembly.
4:
Rotate the upper Dust Filter Assembly towards the gap
direction to detach the HEPA filter and plastic cyclone
filter.
5
DETACHING THE DUST CONTAINER AND FILTERS
To get the best performance, please ensure that the Dust Container is emptied and the Dust
Filters are cleaned after at least every five uses of the appliance.
ASSEMBLING THE DUST FILTER ASSEMBLY
Please ensure the Dust Filter Assembly is assembled correctly and the Dust Container Lid is
“locked” in position. Never operate the appliance without the Dust Filter Assembly in place.
1:
Turn off the appliance and disconnect the charger (if attached) from the main unit.
2:
Firmly slot the HEPA filter and plastic cyclone filter inside the Dust Filter Assembly. Rotate the
upper Dust Filter Assembly to lock it in place.
3:
Securely place the Dust Filter Assembly inside the Dust Container. Rotate the Dust Contailer Lid
towards the “lock” marking.
4:
Attach the Dust Container back onto the appliance’s main unit ready for use.
USING THE APPLIANCE
DETACHING THE VACUUM CLEANER PARTS FROM THE UNIT
Before detaching the parts, turn off the appliance and
disconnect the charger (if attached).
Detaching the Extension Tube
Grasp the appliance’s main unit handle and press the Exten-
sion Tube release button. Once pressed, pull out the Extension
Tube from the appliance’s main unit.
Detaching the Floor Brush
Press the Extension Tube release button and pull out the
Extension Tube from the Floor Brush.
Unlock Lock
2
Open
Push Button
1
