Chapter 4: Troubleshooting
2.
Then type
reload
in the Asterisk console and call in. You should see
the DID come in on your T1/E1 line.
My D Channel seems to go up and down.
Check to be sure you have set your timing parameters correctly. Also,
check the common causes of problems for a T1. See the
Common Fixes
for all cards
, page 50.
I have trouble dialing out. It seems that one type of dialing works
(local, long distance, international), but another does not.
Check your
pridialplan
option and verify that you are dialing using the
method your telco is expecting.
I am having trouble receiving DID information over E&M.
Try the other types of E&M (featd, featb, etc.) to match the method your
telco is using to stream information.
I am having issues with my PRI. How can I see the messages coming
across my D channel?
Enter the following command:
*CLI> PRI debug span X
where X is the port from which you are connected. This command will
show you the PRI messages coming across your D channel for that span.
Digium, Inc.
Page 47
Содержание TE131
Страница 1: ...TE130 Series TE131 TE132 TE133 TE134 User Manual 601 00022 Rev B...
Страница 14: ...Chapter 1 Overview 3 Figure 2 Sample IP Phone Application Digium Inc Page 14...
Страница 23: ...Chapter 2 Card Installation Status LED Port 1 PCI Express Connector Figure 3 TE133 Card Digium Inc Page 23...