Chapter 3: Configuration
Testing Your Configuration
1.
Load DAHDI drivers into the kernel using the
modprobe
utility. The
appropriate driver for the TE130 Series cards is
wcte13xp
. Users in all
countries except Australia should use the following modprobe
command:
# modprobe wcte13xp
# dahdi_cfg -vv
2.
Run
dahdi_tool
from the command line and see if the span turns
green for each span you have connected.
# dahdi_tool
3.
Execute the following Asterisk command to see if the span came up
successfully.
# asterisk
# asterisk -vvvr
Digium, Inc.
Page 45
Содержание TE131
Страница 1: ...TE130 Series TE131 TE132 TE133 TE134 User Manual 601 00022 Rev B...
Страница 14: ...Chapter 1 Overview 3 Figure 2 Sample IP Phone Application Digium Inc Page 14...
Страница 23: ...Chapter 2 Card Installation Status LED Port 1 PCI Express Connector Figure 3 TE133 Card Digium Inc Page 23...