13
/
15
Click “
Push Button Config(PBC)
” , a message box will appear:
Please activate Push-Button function on wireless access point
now, and wireless network card will establish secure connection
with access point within one minute.
CHAPTER 3: Troubleshooting
If you encounter any problem when you‟re using this wireless
network card, don‟t panic! Before you call your dealer of purchase
for help, please check this troubleshooting table, the solution of
your problem could be very simple, and you can solve the problem
by yourself !
Scenario
Solution
I can‟t find any
wireless access
point / wireless
device in „
Site
Survey
‟ function.
1.
Click „
Refresh
‟ for few more times and see if
you can find any wireless access point or
wireless device.
2.
Please move closer to any known wireless
access point.
3.
Ad hoc‟ function must be enabled for the
wireless device you wish to establish a direct
wireless link.
4.
Please adjust the position of network card
(you may have to move your computer if
you‟re using a notebook computer) and click
„
Refresh
‟ button for few more times. If you
can find the wireless access point or wireless
device you want to connect by doing this, try
to move closer to the place where the wireless
access point or wireless device is located.
Nothing happens
when I click
„
Open Config
1.
Please make sure the wireless network card is
inserted into your computer‟s USB port.
2.
Reboot the computer and try again.
