30
MAC Control
MAC Address Control allows you to assign different access right for different users and to assign a
specific IP address to a certain MAC address.
1.
MAC Address Control
Check “Enable” to enable the “MAC Address Control”. All of the settings in this page will take
effect only when “Enable” is checked.
2.
Connection control
Check "Connection control" to enable the controlling of which wired and wireless clients can
connect with this device. If a client is denied to connect with this device, it means the client
can't access to the Internet either. Choose "allow" or "deny" to allow or deny the clients,
whose MAC addresses are not in the "Control table" (please see below), to connect with this
device.
3.
Association control
Check "Association control" to enable the controlling of which wireless client can associate
to the wireless LAN. If a client is denied to associate to the wireless LAN, it means the
client can't send or receive any data via this device. Choose "allow" or "deny" to allow or
deny the clients, whose MAC addresses are not in the "Control table", to associate to the
Wireless LAN
Click “Save” to store your setting or “Undo” to give up
