20
12. Primary DNS: This feature allows you to assign a Primary DNS Server, contact to your ISP to
get it.
13. Secondary DNS: This feature allows you to assign a Secondary DNS Server, you can contact
to your ISP to get it.
14. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the Connect-button in the
Status-page.
15. Keep Alive: you can diagnose your connection by it.
iBurst Type:
The WAN fields may not be necessary for your connection. The information on this
page will only be used when your service provider requires you to enter a User Name and
Password to connect with the iBurst network.
Please refer to your documentation or service provider for additional information.
1. Account: Enter the new User Name for your PC card here,
you can contact to your ISP to get it.
2. Password: Enter the new Password for your PC card here,
you can contact to your ISP to get it.
3. Primary DNS/Secondary DNS: Optional, This feature allows you to assign a DNS Servers
4. Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the Connect-button in the
Status-page.
5. Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE
session. Set it to zero or enable “Auto-reconnect” to disable this feature.
6. Service Name: optional. Input the service name if your ISP requires it.
Otherwise, leave it blank.
7. Assigned IP Address: Optional, Input the IP address you want. Usually, leave it blank.
8. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users.
The default MTU value is 0(auto).
