11
7.
To control the behavior of an attached DisplayLink device (or screen), it is
possible to use
Windows Key+P
to display a menu (and cycle through it) to allow:
Disconnect
Projector,
Duplicate, Extend, Projector Only.
*Actual strings depend on your operation system. These screen shots are from
Windows 7 and might vary slightly for each operation system.
*Actual strings depend on your operation system. These screen shots are from Windows Vista
32-bit and might vary slightly for each operation system.
Connected to the adapter and monitor
If your monitor is not yet connected to the adapter, make the connection and
power on your monitor.
For VGA model: Use a VGA cable (not provided) to connect the VGA jack to a
monitor equipped with VGA input jack.