6
2. Please wait while Windows configures
DisplayLink Core Software
. Your screens
may temporarily go black or flash during this process.
*Actual strings depend on your operation system. These screen shots are from Windows XP
and might vary slightly for each operation system.
Notice for Windows Vista/2000 users
:
If prompted to restart your computer, click
Yes
to restart or
No
to manually
restart later. Note that a reboot is always needed for a successful installation.
If the reboot prompt doesn’t appear, make sure to manually reboot your
computer.
3. When finished, the installation screen will disappear and you will return to your
desktop.
4.
Connect
the USB display adapter to your computer and monitor. Connect the
smaller end of the USB cable to the adapter. Then connect the other end of the
USB cable to an USB 2.0 port on your computer.