52
10.3.6 L (Left) and R (Right) Throttle Display
The decoder address selected on the
L
Throttle
is displayed on the bottom line
of the LCD to the left of the Mode Indicator. The decoder address selected on
the
R
Throttle
is displayed to the right of the Mode Indicator. The address can
show as either the 2-digit or the 4-digit decoder address. If no address is
selected the display will show “
SEL
.” If a 2-digit address is selected (00-127),
the display will show two or three digits. If a 4-digit address is selected (0128
-9983), the display will show all four digits including the leading zero.
10.3.7 L and R Bar Graph
Each throttle has a bar graph located above the text area of the LCD. Each of
these indicates the speed setting of the
L
and
R
Throttles
graphically from a sin-
gle dot (0% throttle) to 20 dots (full throttle). This is useful when the text area
is showing information other than speed.
2 digit address 25
Selected on the
L Throttle
Running at 0% speed
In reverse.
4 Digit address 5234
Selected on the
R Throttle
Running at 25% speed
In the forward direction
Functions 0, 1, & 3 on.
Track Power
Indicator ON
Throttle in normal operations
mode indicated by Fn.
In Function (Fn) Mode
Throttle knobs control Loco's
Speed & Direction.
Keypad entries control functions.
Bar Graph showing 50% speed on R Throttle
Bar Graph showing full speed on R Throttle
