Digitrax SE74, Руководство пользователя, Страница: 8 / 12

© 2022 Digitrax, Inc. www.digitrax.com — 8 —
problems.
9. Note that the example 1st SE74 SN#3122 and 2nd SE74 SN#2399 sit
between the minimum SW 5 and maximum SW15 Base SW#'s to have no
overlaps with the first and second SE74's. This Switch 'gap' is because the 1st
SE74 only uses to Sw004, but its aspect number goes from head 1 to 16, so
any following SE74 has to have a Base Sw at 17 or above. The DS74's don't
use Aspect address ranges so can be arranged in this 'gap'.
10. Press "X" to exit any DT602 advanced mode.
11. This advanced DT602 capability allows you to setup all DS7x family device
combinations, like the SE74, DS78V, PM74 and SE74 etc, at installed posi -
tions on a LocoNet layout, quickly and conveniently, even if all devices are
initially at factory-default Base address SW1.
12. If you are using other types of non-DS7x family control devices, you will
have to note their active Base SW addresses/ranges and manually ensure the
SE74's are configured to not overlap these.
6.1 Reading and Editing a SE74's routes:
As for section 2.0, if
you have a suitable DT602 plugged into LocoNet, press the; Menu>3>4 keys to
enter Route Editor menu. If any SE74 is on LocoNet, the DT602 will beep after
about one second and show "DS7x" routes at the D soft key position.
1. Press the D soft key to now enter the
"Selecting DS7x device:" screen,
2. Rotate the LH encoder knob to under -
line the SE74 to edit routes for.
3. Now press DOWN the LH encoder knob
to read in and display the Routes of the
selected SE74, as shown in adjacent
"EDIT DS7X Rt#:" screen.
4. The LH encoder knob now selects a
Route# and the RH encoder selects the
black outlined Entry# to edit. Soft A key
will toggle the entry from T to C direc -
tion choice. Numeric keys will change
the SW# in the outlined Entry position.
"Add" soft key allows inserting another
entry at current position and "Delete"
will remove the current entry. The "SW
test" soft key will send just the outlined
switch# and direction to LocoNet.
5. After edit of any Route is complete
be sure
to press the "Save" soft key to
update this SE74 Route to non-volatile memory. Press "X" to exit.
6. With LocoNet connected SE74 routes have System wide control capability.
EDIT DS7x Rt# 01 of 8
Entry# TOP of 8
0100 c
0224 t
Thrown Add Save
Delete
DS7X Edit: LH knob selects
SW test CS Rt
SE74 04 #0945