Digitimer Ltd - DS8R Operator’s Manual
Version 2.0
10
Digitimer Ltd.
Copyright ©2019
Supplied Accessories
The following items should have been packed with your DS8R Bipolar Constant Current Stimulator:
Mains Power Lead/Cord.
USB Connection Cable (part code D-USBF).
Operator’s Manual.
Test Record Sheet.
Windows compatible virtual front panel software (supplied on USB Stick).
Please note that the USB cable supplied is specifically for use with the DS8R. USB cables from other
suppliers are NOT suitable for use with this stimulator and may result in increased EMC emissions or
decreased EMC immunity.
Optional Accessories
In order to facilitate connection of electrodes, we offer the D185-HB4 Electrode Extension Cable.
This provides a 4.5m (14.5ft) extension of the output sockets (4mm shrouded) terminating in a pair
(2) of DIN 42 802-1 1.5mm “Touch Proof” sockets that are colour coded to the original sockets.
The D185-HB4 is specifically designed to meet the requirements of EN(IEC) 60601 and is suitable for
use with our DS8R, D185, DS7A and DS5 stimulators.
Mains Connections
The DS8R is shipped complete with a safety tested mains lead (fitted with a suitable moulded mains
plug) to most countries. If the mains plug supplied is not suitable, please advise Digitimer of the
correct plug for your country. As it is not possible to obtain certain moulded mains plugs in the UK
we will supply a mains lead with a British plug in these cases.
Mains Plug Fuse
If it is possible to fit a fuse into the mains plug, this should be of the correct style and be rated at 5
Amps.
Mains Inlet Fuses
Check that the correct fuses have been inserted. Refer to the Specifications section for more details.
If replacing these fuses, please ensure the correct size, rating and type is used as a replacement.
