Digitimer Ltd – D360R-4 Operator’s Manual
Version 1.0
22
Digitimer Ltd.
Copyright ©2021
4.
Mains Inlet Socket (IEC 60320-C14)
For connection to mains socket via supplied mains cable.
5.
Mains Fuse Holder
Ensure fuses are correct rating for the local voltage supply and match the voltage selector setting.
6.
USB Socket
For connection to host Windows PC using supplied USB cable.
7.
Deblock Input (BNC)
For TTL gated or triggered deblock of the amplifier.
8.
Signal Output Connector
Signal output connector (female) for use with supplied 9-way “D” to 4 BNC cable.
External view of Signal
Output Connector
Pin
Function
1
Channel 1 Output
6
Channel 2 Output
2
Channel 3 Output
7
Channel 4 Output
3
Ground
All other pins are unused
Rear Panel Symbols
O
Off (power) - Indicates OFF
position of Mains Power
switch.
Equipotentiality Connector.
I
On (power) - Indicates ON
position of Mains Power
switch.
Input – signal input connector.
Control Input – USB socket
for connection to computer.
Digitimer is a WEEE registered
manufacturer. Contact us for advice
relating to disposal of this device.
Input – Control Input
Digitimer have declared that this
equipment complies with European CE
marking (LVD and EMC)
Output - signal output
connector.
