DigiTech RP200A, Руководство пользователя

Страница: 34 / 40

WAH
(Wah) - The Expression Pedal acts as a Wah when the Wah Effect is engaged.
A GAIN
(Amp Gain) - Expression Pedal controls the Amp Gain or amount of distortion for
the selected Amp Type.
AMPLVL
(Amp Level) - Expression Pedal controls the Volume of the selected Amp Type.
AMOUNT
(Amount) - Expression Pedal controls the Amount of the selected Effect Type.
EFFLVL
(Effect Level) - Expression Pedal controls the Mix Level of the selected Effect Type.
YAYA
(YaYa™) - Expression Pedal acts as a Ya Ya™ Effect when YaYa™ is engaged.
WHAMMY
(Whammy™) - Expression Pedal acts as a Whammy™ Pedal when Whammy™ is
engaged.
FBACK
(Feedback) - Expression Pedal controls the amount of Delay Feedback.
DLYLVL
(Delay Level) - Expression Pedal controls the Mix Level of the selected Delay Type.
DECAY
(Decay) - Expression Pedal controls the length of Reverbs Decay time.
REVLVL
(Reverb Level) - Expression Pedal controls the Reverbs Mix Level.
VOLPRE
(Volume Pre) - Expression Pedal controls the Volume after the Amp Modeling but
before the Effects.
VOLPST
(Volume Post) - Expression Pedal controls the Volume at the end of the Effects chain.
3. Rotate the Parameter 2 knob to select the minimum value the assigned parameter will reach
with the Expression Pedal in the toe up position (not available when volume is the assigned
parameter).
4. Rotate the Parameter 3 knob to select the maximum value the assigned parameter will
reach with the Expression Pedal in the toe down position (not available when volume is the
assigned parameter).
5. Store your Expression Pedal assignment to your Preset. See page 13 for more information on
the storing procedure.
28