DigiTech RP200A, Руководство пользователя

Страница: 30 / 40

Detune (
DetUNe
)
A Detuner will make a copy of your incoming signal, take the copied signal slightly out of tune
from the original, and mix the two signals together.The result is a doubling type of effect as if
two guitars were playing the same part together.
Amount - The Parameter 2 knob adjusts the amount of pitch difference applied to the copied
signal. Ranges from
-12
to
12
.
Level - The Parameter 3 knob controls the mix of the detuned note. Ranges from
0
to
99
.
Pitch Shift (
PitCH
)
A Pitch Shifter copies the incoming signal, then shifts the pitch of the copy to a different note.
The shifted note is then mixed back with the original signal sounding as if two guitars were
playing different notes.
Amount - The Parameter 2 knob selects the interval of the shifted pitch. Ranges from
-12
(12 semitones below) to
24
(24 semitones above).
Level - The Parameter 3 knob controls the mix level of the shifted pitch. Ranges from
0
to
99
.
Whammy™ (
wHammy
)
Whammy™ is an effect that uses an Expression Pedal to bend the pitch of the
incoming signal, or add a bendable harmony with the original signal. As the Pedal
is moved, the note will bend either up or down.When Whammy™ is selected, it is
automatically placed before the Amp Modeling as shown in the block diagram.
Amount - The Parameter 2 knob selects the interval and direction of the pitch bend. Choices
are as follow:
24