DigiTech Mistral3, Руководство пользователя

Страница: 11 / 30

2 Main clock
At start up, the switches to “Main clock" and the function
is displayed by the caption “ CL ” in the “ Type Selected ” zone of the display.
This function enables a high-precision hundredth-resolution clock that can
be programmed throughout the 24 hours.
During regular operation, this feature can be manually enabled by pressing
key.
Clock setting
Upon startup, the clock starts counting from 0.00 time.
Press
to access the programming mode.
The switches to programming and “ SET ” is displayed on
the screen.
The time group starts bilking, to show that it can be edited.
Use the
and keys to increase or decrease the value.
If pressing continuously, digits slide faster.
Press
key to reset the blinking group of digits.
Press to switch to the programming of the next group.
Press to return to the programming of the previous group.
When you have reached the “second” group, press again to return to
the programming of the hours.
Exit without synchronizing
Press key to exit from the programming modifying the
synchronization of seconds.
I
WARNING: any change applied to hours and/or minutes directly
modify the clock. Therefore, after having applied the changes,
you cannot return to the setting of the previous time
english Main clock
7