DigiTech IC-XC0436, Руководство пользователя

Страница: 23 / 27

20
2. Under the current alert reading, press and hold
[ ALERT ]
key for 2 seconds to enter alert
setting and the alert reading will flash.
3. Press [ ] or [ ] key to adjust the value or press and hold the key to change rapidly.
4. Press [ ALERT ] key to confirm the value.
5. Press [ ALARM ] key to toggle the regarding alert on / off.
6. Press [ ALERT ] key to step to next alert reading.
High /Low
Alert on
Alert off
Alert on Alert off
7. Press any key on the front side to save alert on /off status and back to normal mode, or it
will automatically back to normal mode after 30 seconds without pressing any key.
TO SILENCE THE ALERT ALARM
Press [ALARM / SNOOZE] key to silence the alert alarm or let the alarm automatically turn off
after 2 minutes.
NOTE:
-Once the alert is triggered, the alarm will sound for 2 minutes and the related alert icon and
readings will flash.
-If the alert alarm is automatically off after 2 minutes, the alert icon and readings will still keep
flash until the weather reading is out of the alert range.
-The weather alert will sound again when the weather readings falls into the alert range again.
BACKLIGHT
The main unit backlight can be adjust, using the [ HI / LO / AUTO ] sliding switch to select the
appropriate brightness:
-Slide to the [ HI ] position for the brighter backlight.
-Slide to the [ LO ] position for the dimmer backlight.
-Slide to the [ AUTO ] position for the auto adjust backlight that according to environment light
level.
MAINTENANCE
BATTERY REPLACEMENT
If the low battery indicator “ ” displayed in
OUT or CH section, it indicates that the current
channel wireless or outdoor 5-in-1 sensor
battery power is low. You should replace all the
batteries in the current channel sensor at once.
CLEANING THE RAIN COLLECTOR
1. Unscrew the rain collector by turning it 30°anti-clockwise.
2. Gently remove the rain collector.
3. Clean and remove any debris or insects.
4. Install the collector when it is clean and fully dried.
N N
“Unlock” Position “Lock” Position
N