Stereo Operation
1. Connect the guitar to the input of the GNX3.
2. Connect the GNX3’s Left output to the input of one amplifier or channel of a power amp.
3. Connect the GNX3’s right output to a second amplifier, or to a second channel of a power amp.
4. Select Stereo as the Output configuration from the Utility menu. See page 65 for more on
selecting the Output configuration.
Direct to a Mixing Console
The GNX3 can be connected directly to the inputs of a house PA system, or a recording console.
1. Connect the guitar to the GNX3’s input.
2. Connect the GNX3’s outputs to the channel inputs of the mixing console.
3. If the GNX3 is used in Stereo configuration, set the pan controls of the mixer hard left and right,
and select Stereo as the output configuration from the Utility menu. See page 65 for more
information on on selection the Output configuration.
PAN / LEVEL
SETUP
REMAIN
PAN / LEVEL
SETUP
REMAIN
8
Introduction
Содержание GNX3
Страница 1: ...GENETX GUITAR WORKSTATION TM USER S GUIDE...
Страница 4: ......
Страница 82: ......
Страница 83: ......