3. Using the FX Mode or Rhythm button, scroll to the left or right until the alpha-numeric Display shows
PSTDMP
(Preset Dump).The numeric Display will show
1
indicating that the GNX1 is ready to dump Preset num-
ber 1.
4. Use the Data Up/Down buttons to select the Preset number you wish to send out.
5. Press the Store button once.The Display reads
SND TO
which is asking you to select the destination Preset loca-
tion.
6. Use the Data Up/Down buttons to select the destination Preset number.
7. Set the MIDI recording device to record.
8. Press the Store button again.The Display reads
PSTSND
until the dump is complete at which time the Display
briefly reads
DONE
before it returns to showing
PSTDMP
.
9. Press the Exit button to return to the GNX1 Presets.
The Preset Dump will send information on the MIDI channel defined in the MIDI Channel menu.
User Amp Dump
The Amp Dump menu allows up loading of just the GNX1 Amp HyperModels™ to a sysex librarian, or MIDI record-
ing device.This is useful for making a backup copy of your customized Amp HyperModels™, or loading your
HyperModels™ into another GNX1.The procedure for performing a Sysex Preset Dump is as follows:
1. Connect a MIDI cable from the GNX1 MIDI Out to the the MIDI In of a MIDI recording device or the MIDI in of
another GNX1.
2. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
3. Using the FX Mode or Rhythm button, scroll to the left or right until the alpha-numeric Display shows
AMPDMP
(Amp Dump).The numeric Display will show
1
indicating that the GNX1 is ready to dump Amp number
1.
4. Use the Data Up/Down buttons to select the Amp number you wish to send out.
5. Press the Store button once.The Display reads
SND TO
which is asking you to select the destination User Amp
location.
6. Use the Data Up/Down buttons to select the destination User Amp number.
7. Set the MIDI recording device to record.
8. Press the Store button again.The Display reads
AMPSND
until the dump is complete at which time the Display
briefly reads
DONE
before it returns to showing
AMPDMP
.
9. Press the Exit button to return to the GNX1 Presets.
The Amp Dump will send information on the MIDI channel defined in the MIDI Channel menu.
MIDI Mapping
The MIDI Mapping in the GNX1 allows any of the Factory, or User Preset to be accessed from external MIDI pro-
gram change commands which may not necessarily correspond to the desired GNX1 Preset.This is useful when mul-
tiple MIDI devices are chained together and are all controlled by one central unit. For example, the main MIDI con-
troller can send out a program change command telling a particular MIDI unit to change to Program 10, but you may
want the GNX1 to change to User Preset 27.You can remap the GNX1 so when it receives MIDI Program change
10, it calls up User Preset 27. The Procedure for mapping MIDI program changes is as follows:
1. Press the Utility button once.The LED in the Utility button will light indicating you are in the Utility section.
2. Using the FX Mode or Rhythm button, scroll to the left or right until the alpha-numeric Display shows
M 1>U
.
3.With the digit to the right of the M blinking, use the Data Up/Down buttons to select the incoming MIDI pro-
gram number you wish to remap.
4.When the incoming MIDI program number has been selected, press the Rhythm button once.The digit in the
red numeric Display will begin to flash.This number represents the Preset number within the GNX1 that will be
accessed when the GNX1 receives the MIDI program number shown to the right of the M in the alpha-numeric
Display.
5. Press the Data Up/Down buttons to select the desired Preset number the GNX1 will initialize when it receives
the selected MIDI program change.
6. Press the Exit button to return to the GNX1 Presets.
37
S
ECTION
F
IVE
- O
THER
F
UNCTIONS
