DigiTech DC-1122, Инструкция по эксплуатации

Страница: 17 / 22

Scanning
Channel scan performs searches for active signals
in and endless loop of channels.
Scan only checks channels or frequencies that are
in the SCAN Memory, which are indicated by the
MEM icon. The unit has tow Scan Memory modes:
Open Scan (OS) mode and Group Scan (GS)
mode, to give you flexibility and allow you to use
the radio more effectively.
Furthermore, any combination of the three channel
groups can be scanned by pressing
CTCSS/DCS
during scan to select the desired channel groups.
Ÿ
Press SCAN to start scanning. The SCAN icon
appears.
Ÿ
The scan direction can be changed at any time
by pressing
5
/
6
.
Ÿ
Press SCAN to stop scanning.
Add/Remove channels from scan Memory
Select which scanning mode you wish to use OS or GS. Select the channel
you want to store.
Press and Hold MEM to store. MEM icon appears.
To remove the channel from SCAN memory, press and hold MEM once more.
The MEM icon disappears.
Open Scan (OS) Mode
OS Mode is the default scan setting. All UHF-CB, user-programmed extra RX
channels, Police and Fire & Ambulance frequencies have been added to the OS
SCAN Memory for convenience. Tao add/remove channels from OS SCAN
Memory.
Allows continuous scanning of all selected channels. If an active channel is
found, scanning will stop on that channel. If the received signal ceases, the unit
will wait 3 seconds for the signal to return, otherwise scanning resumes.
After transmission in scan mode, the unit will wait 20 seconds for the signal to
return, otherwise scanning resumes.
To skip the active channel, press
5
/
6
momentarily. To deactivate SCAN, press
SCAN.
NOTE
!
If SCAN is deactivated while on an active channel, the unit will stay
on that active channel. If no channels are active, the unit will reinstate
the starting channel.
-15-
SCAN
MEM SQ
CTCSS DCS
PO FI M.SEL
DUAL /
/