background image

About channels

The unit has 80 channels, but not all of these are available; several are 
prohibited for voice transmission and other are restricted, as explained below.

The selected channel is displayed on the LCD.

Ÿ

Channels 5 and 35 are for emergency calling. Do not use these channels in 
non-emergency cases. According to AS/NZS 4365:2011. the operation of 
selective calling (including CTCSS and Scrambler)is prohibited on designated 
emergency channels 5 and 35.

Ÿ

Channels 22 or 23 are prohibited for the transmission of speech telephony 
signals, according to AS/NZS 4365:2011.

Ÿ

Channels 61,62 and 63 are reserved for future use. They cannot be activated 
until approved by the ACMA CBRS Class Licence in Australia.

Ÿ

Channels 1-8 and 31-38, 41-48 and 71-78 are used as repeater channels with 
750kHz offset. Channels 1-8 and 41-48 are used for mobile reception, and 
channel 31-38 and 71-78 for mobile transmission.

Ÿ

Only use this repeater function when a long distance communication via the 
local repeater facility is specifically required. Unless it is necessary, avoid 
operation on locally used repeater input channels ( channels 31-38 and 71-78) 
or locally used repeater receiving channels ( channels 1-8 and 41-48).

Ÿ

Channel 11 is the customary calling channel in Australia for establishing 
communication.

Ÿ

Channel 40 is the customary road vehicle channel.

NOTE

!

NOTE: This product is made to the new standard 2011 version. There 
are possible operational issues during the changeover from the over 
version 25kHz to the new version of 12kHz channel spacing. They 
include the consequences of narrowband (with 2.5kHz deviation) 
transmissions being received on the old wideband equipment, and 
wideband (with 5.0kHz deviation) transmissions being received on 
newer narrowband equipment.

There is a possibility of interference due to the older equipment being 
operated on channels adjacent to new narrowband channels.

The list of currently authorised channels can be obtained from the 
ACMA website in Australia and MED website in New Zealand.

-9-

Содержание DC-1122























Отзывы: