DigiTech DC-1122, Инструкция по эксплуатации

Страница: 13 / 22

Receiving a signal
The unit is continuously in RECEIVE mode when it is on and not transmitting.
When you receive a signal on the current channel, the RX icon will appear.
Transmitting
The unit transmits only on UHF-CB
channels.
Ÿ
Press and hold the PTT button to transmit
your voice: the TX icon will appear;
Ÿ
While holding the PTT button, speak into
the microphone using a normal tone of
voice. Hold the microphone in a vertical
position about 5 to 7 cm from the mouth.
PTT
CALL INST
Programming the Instant Priority
Channel
Ÿ
Press
5
or
6
button to select the Priority
Channel you prefer.
Ÿ
Press and hold INST button to store the
new setting .INST icon appears.
Ÿ
Momentarily press INST to return to the
Instant channel, press INST again to
return to the previous channel.
-11-
SCAN
MEM SQ
CTCSS DCS
PO FI M.SEL
DUAL /
/