DigitaLinx EDU-KIT-001, Руководство по установке

Страница: 9 / 24

IR Learning
Enter IR Learning Mode
Exit IR Learning Mode
Programming the Display On and Display Off Functions
If the power command for the display remote is a toggle, use the same button for the
ON and OFF commands below.
Press and hold the HDMI 1 button on the Control Panel for three seconds. The ON and
OFF buttons will light up.
Press and hold the HDMI 2 button on the Control Panel for three seconds. The ON and
OFF buttons will go dark.
1. Press the ON button, and it will start to flash.
2. Point the display remote at the Control Panel IR sensor and the press the Power
On button on the remote. The ON button on the Control Panel will stop flashing.
3. Press the OFF button, and it will start to flash.
4. Point the display remote at the Control Panel IR sensor and the press the Power
Off button on the remote. The OFF button on the Control Panel will stop flashing.