DigitaLinx EDU-KIT-001, Руководство по установке

Страница: 1 / 24

EDU-KIT-001 Installation Guide
The Digitalinx EDU-KIT-001 is a multi-function AV distribution system designed to
provide HDMI video switching, system control, video extension and analog audio
amplification in a convenient kit. Utilizing the Valens Colligo VS2110 series chips, power,
control, video up to 1080p, and audio are transported over a single 30m (98 ft) Category
6A cable between the wall plate transmitter and the receiver. The wall plate control
module connects to the wall plate transmitter with a second Category 6A cable. All
the power needed for the system is provided by the receiver. Additionally, the receiver
features a built-in web GUI for control and analog audio de-embedding to a built-in
2x20 watt stereo amplifier.
FIRMWARE
ON LINK HDCP
EDU-KIT-001
RX / Receiver
OUTPUT CONTROL AUDIO MIC INPUT NETWORK
2x20 Watts @ 4 Ω
24V DC
LINE
MIC
MIC R L
LINE OUT
TX RX
RS232 IR OUT
REMOTE
MUTE
FROM
TOUCHSCREEN TO DISPLAY HDBT IN/PoC TCP/IP
HDMI IN 1 SOURCE SELECT
TO PC HDMI IN 2
FIRMWARE
RESET
HDCP LINK
VOLUME
MIC
SOURCE
ON
HDMI 1
IR
HDMI 2
CONFIG
OFF