Copy and Load Control Settings
Copy Control Settings
Load Control Settings
The system IR or RS232 configuration can be copied to a USB thumb drive and loaded into
additional systems or be saved as a backup.
Insert a 4GB or smaller FAT32 formatted thumb drive into the Configuration port on the front
of the Control Panel.
Simultaneously press and hold the OFF and HDMI 2 buttons on the Control Panel for three
seconds. As soon as the buttons are released, they will light up while the copy is in progress.
Remove the thumb drive from the Configuration port once the buttons go dark.
Insert a 4GB or smaller FAT32 formatted thumb drive with saved configuration settings into
the Configuration port on the front of the Control Panel.
Simultaneously press and hold the ON and HDMI 1 buttons on the Control Panel for three
seconds. As soon as the buttons are released, they will light up while the upload is in progress.
Remove the thumb drive from the Configuration port once the buttons go dark.
