To program RS232 display control so the display and DL-RMKTC2H-W power status can be
controlled separately with the DL-RMKTC2H-W control keypad ON / OFF operation, navigate
to the SETTING page in the web GUI and change the DISPLAY CONTROL SELECT option to
RS232 and then change the DISPLAY POWER SYNC option to OFF.
Programming System and Display Power Control Separately
To load the connected displays RS232 ON or OFF command sets into the DL-RMKTC2H-W,
navigate to the COMMAND page and enter in the command sets and proper RS232 settings
according to the display manufacturers suggestions. See
Command Tab (RS232 Display
Control)
in this manual for reference.
Control Keypad Operation (continued)
Once all RS232 settings and commands are in place, turn the DL-RMKTC2H-W systems power
ON or OFF by pressing and holding the keypads ON / OFF button to power system ON / OFF.
To power display ON or OFF separately, simply quick press the DL-RMKTC2H-W keypad ON /
OFF buttons.
