Included Accessories
Safety Precautions
•
DL-RMKTC1H1V-W Control Keypad, Transmitter and Receiver Set
•
Locking Power Supply with US Power Cable
•
USB Type A to Type B Cable
•
IR Emitter
•
Two Mounting Rails with Screws
•
Six Wall Box Screws
•
Three 3-pole Removable Terminal Blocks
•
One 2-pole Removable Terminal Block
•
One 4-pole Removable Terminal Block
•
Installation Guide
To insure the best from the product, please read all instructions carefully before using the
device. Save this manual for further reference.
•
Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
•
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to
persons.
•
Do not dismantle the housing or modify the module. It may result in electrical shock or
burn.
•
Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
•
Refer all servicing to qualified service personnel.
•
To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
•
Do not put any heavy items on the extension cable in case of extrusion.
•
Do not remove the housing of the device as opening or removing housing may expose you
to dangerous voltage or other hazards.
•
Install the device in a place with good ventilation to avoid damage caused by overheating.
•
Keep the module away from liquids.
•
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an
object or liquid falls or spills on to the housing, unplug the module immediately.
•
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
•
Unplug the power cord when left unused for a long period of time.
•
Information on disposal for scrapped devices: do not burn or mix with general household
waste. Please treat them as normal electrical waste and recycle the devices properly.
