To program RS232 display control so the display and DL-RMKTC1H1V-W power status can be
controlled simultaneously with the DL-RMKTC1H1V-W control keypad ON / OFF operation,
navigate to the SETTING page in the web GUI and change the DISPLAY CONTROL SELECT
option to RS232 and then change the DISPLAY POWER SYNC option to ON.
RS232 Display Control
Programming System and Display Simultaneous Power Control
When RS232 is used to control the display, the DL-RMKTC1H1V-W system can be configured
to synchronize with the power of the display simultaneously or can be programmed so system
power and display power can be controlled separately.
After the RS232 settings are all in place, you can now turn the DL-RMKTC1H1V-W systems
power and display power ON or OFF by quick pressing the ON / OFF status buttons on the DL-
RMKTC1H1V-W control keypad.
To load the connected displays RS232 ON or OFF command sets into the DL-RMKTC1H1V-W,
navigate to the COMMAND page and enter in the command sets and proper RS232 settings
according to the display manufacturers suggestions. See
Command Tab (RS232 Display
Control)
in this manual for reference.
