DigitaLinx DL-44E-KIT, Инструкция по установке и эксплуатации

Страница: 12 / 24

DL-44E-KIT Installation Guide
12
Router Connection
1. Configure the router to use the same IP range as the matrix, such as 192.168.0.1.
2. Connect the computer to the router.
3. Connect the DL-44E-KIT to the router
Crossover Cable Connection
TCP/IP Control
Besides IR control, RS232 control, the Matrix Switcher boasts option TCP/IP port for IP control.
Default settings: IP: 192.168.0.178; Subnet Mast: 255.255.255.0; Gateway: 192.168.0.1; Serial Port: 4001.
IP& gateway can be changed as you need, Serial Port cannot be changed.
Connect the Ethernet port of control device and TCP/IP port of the Matrix Switcher, and set same network
segment for the 2 devices, users are able to control the device via web-based GUI or designed TCP/IP
communication software.
The Matrix Switcher can be controlled by PC without Ethernet access or PC(s) within a LAN.
Controlled by PC
Connect a computer to the TCP/IP port of the Matrix Switcher, and set its network segment to the same as the
Matrix Switcher’s.
Controlled by PC(s) in LAN
Connect the Matrix Switcher, a router and several PCs to setup a LAN
TIA/EIA-568A
Green/White
Green
Orange/White
Blue
Blue/White
Orange
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
TIA/EIA-568B
Orange/White
Orange
Green/White
Blue
Blue/White
Green
Brown/White
Brown
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
1 8
Crossover Cable Pinout
Connect a computer to the TCP/IP port of the Matrix Switcher, and set its network segment to the same as
the Matrix Switcher’s. DL-44E-KIT provides a built-in GUI for convenient TCP/IP control. GUI allows users to
interact with the DL-44E-KIT through graphical icons and visual indicators. Type 192.168.0.178 in your browser
to access the web GUI.