DigitaLinx DL-44E-KIT, Инструкция по установке и эксплуатации

Страница: 10 / 24

DL-44E-KIT Installation Guide
10
System Operations
The Matrix Switcher can be controlled via the front panel. Please follow the basic programing instructions
below:
1. To convert one input to an output:
Example: Input 1 to Output 3
-Press INPUTS 1 + OUTPUTS 3 + ENTER
2. To convert an input to several outputs:
Example: Convert Input 2 to Output 3 and 4
-Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4 + ENTER
3. To convert an input to all outputs:
Example: Input 1 to all Outputs
-Press INPUTS 1 + ALL + ENTER
IR Remote
Connect an IR receiver to the IR EYE port of the Matrix Switcher, users can control it through the included IR
remote. Here is a brief introduction to the IR remote.
Standby button, press it to enter/ exit standby mode.
INPUTS: Input channel selection buttons, range from 1-4, corresponding IR signal switched
synchronously when switching input channels.
OUTPUTS: Output channel selection buttons.
Menu buttons: ALL, EDID, CLEAR and ENTER.
-ALL: Select all outputs.
-EDID management button: Enable input port to manually capture and learn the EDID data
of output devices.
-CLEAR: Withdraw an operation like switching output channel, learning EDID data before it
comes into effect. Meanwhile, the matrix will return to the previous status.
-ENTER: Confirm operation.