DigitaLinx DL-44E-KIT, Инструкция по установке и эксплуатации

Страница: 11 / 24

DL-44E-KIT Installation Guide
11
Control Far-end Device locally
Connect an IR receiver with IR carrier to the IR IN port of the Matrix Switcher; users can control far-end output
display via its IR remote from local.
In that case, the IR signal is transferred via twisted pair. Only the corresponding IR OUT port can emit control
signals to the remote display.
Control Local Device Remotely
Connect IR receiver(s) to IR IN on far-end HDBT receiver(s), and IR Emitter(s) to IR OUT port of the switcher, and
use the IR Remote of local source to control the device remotely.
Multiple to Multiple: (IR Matrix)
The 4 “IR OUT” ports and the 3 “IR IN” ports on the far-end receivers make up a 4x3 IR matrix. The IR signal is
sent by IR remote, then it is transferred to HDBaseT receiver, then to corresponding zone of the matrix through
the twisted pair, finally it is transferred to IR OUT port and received by controlled device.