With the release of the NavLink2 V2.00 firmware, we now support combined
“
AP
+ S
TA”
mode, where the NavLink2 will always create its own network, even when
Station mode is selected and NavLink2 has joined another network.
This has the advantage that you can always access the NavLink2, even if you have
made a mistake with the Station mode configuration i.e. mis-typed the wireless
password.
To change the network configuration, from the Home page, go to the Settings page
as shown in Figure 4.
Figure 4
By default, the Access Point tab is selected. From here you can change the SSID
(wireless network name), wireless password, wireless channel, static IP settings
and Port used by your NavLink2.
We recommend only changing these settings if you are experienced in computer
networking. Digital Yacht cannot provide support on specific networking issues.
