working in this situation, but it will have recorded details of the error in its
memory. Please contact Digital Yacht when convenient and we will investigate
what has happened.
In the unlikely event that the red “ERROR” LED is permanently ON, please contact
Digital Yacht immediately as this indicates a more serious problem has occurred
that is stopping normal and safe operation.
4.1 - Interfacing with Mobile Apps
NavLink2 is compatible with any app that can receive wireless NMEA data and we
have created an online guide on how
to connect to the most popular ones…
https://digitalyacht.net/configure-apps-software/
The IP address and port that the NavLink2 transmits data on are;
IP Address
-
192.168.1.1
Port
-
2000
By default the NavLink2 is set to operate in TCP mode but you can select UDP
mode using the web interface. Most apps that support UDP connections do not
ask you to enter the IP address just the port number, however if they do, set an IP
address of 0.0.0.0
Please note that on both iOS and Android devices, it is best to always completely
close an app, as highlighted
Some apps, only support a limited number of NMEA sentences and do not like
receiving lots of data. Use the NMEA Mode selection in the web interface to
change the amount and type of data transmitted e.g. for the Navionics Boating
App we have found that Mode 5 “AIS and GPS only” is the best mode to use.
