Digital Watchdog MEGApix DWC-MVT4Wi28 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 63

background image

resolution.
Defog: Activating this function and setting an appropriate value as needed in foggy,
dusty, smoggy or rainy environment to get clear images.
Backlight Compensation (BLC):

⚫

Off: disables the backlight compensation function. It is the default mode.

⚫

HWDR

◆

WDR can adjust the camera provide a better image when there are both very bright

and very dark areas simultaneously in the field of the view by lowering the brightness
of the bright area and increasing the brightness of the dark area. High, middle and low
can be selected.

◆

Recording will be stopped for a few seconds while the mode is changing from non-

WDR to WDR mode.

⚫

HLC: lowers the brightness of the entire image by suppressing the brightness of

the image’s bright area and reducing the size of the halo area.

⚫

BLC: If enabled, the auto exposure will activate according to the scene so that the

object of the image in the darkest area will be seen clearly.
HFR: If this function is enabled, the system will restart and then the maximum value of

the frame rate of the main stream can be set to 60 fps. (This function is not available

for motorized zoom cameras).
Anti-flicker:

⚫

Off: disables the anti-flicker function. This is used mostly in outdoor installations.

⚫

50Hz: reduces flicker in 50Hz lighting conditions.

⚫

60Hz: reduces flicker in 60Hz lighting conditions.

White Balance:

Adjust the color temperature according to the environment

automatically.
Frequency: 50Hz and 60Hz can be optional.
Day/night Mode: Please choose the mode as needed.
Sensitivity: High, middle and low can be selected for switching back and forth from day

to night modes.
Infrared Mode: Choose “ON”, “OFF” and “Auto” (This function is not available for the

cameras without infrared lights).
Exposure Mode: Choose “Auto” or “Manual”. If manual is chosen, the digital shutter

speed can be adjusted.
Corridor Pattern: Corridor viewing modes can be used for situations such as long

hallways. 0, 90, 180 and 270 are available. The default value is 0. The video resolution

should be 1080P or below if this function is used.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.

Schedule Settings of Image Parameters:
Click the “Schedule” tab as shown below.

1

8

«
...
16
17
18
19
20
...
»

Содержание MEGApix DWC-MVT4Wi28
































































Отзывы:

Нет отзывов

Похожие инструкции для MEGApix DWC-MVT4Wi28

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 2

Бренд: Panasonic Страницы: 104

DMC-FX35A - Lumix Digital Camera

Бренд: Panasonic Страницы: 32

Бренд: Panasonic Страницы: 23

Бренд: Q-See Страницы: 12

Бренд: S/C Black Страницы: 34

Бренд: Panasonic Страницы: 124

Бренд: Lytro Страницы: 25

Бренд: FLIR Страницы: 104

Domotify WI-FI Camera

Бренд: WOXTER Страницы: 65

Бренд: Manfrotto Страницы: 7

DS-2CD2723G2-IZS

Бренд: HIKVISION Страницы: 35

Бренд: Oben Страницы: 12

Бренд: Lilin Страницы: 12

Бренд: VistaQuest Страницы: 18

Бренд: Hamamatsu Photonics Страницы: 38

Бренд: Zavio Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды