Setup Case C, D
Network Setup -
To connect the IP Camera directly to a modem, power down
and reset the modem. Leave the modem powered down until
Camera has been connected correctly to the modem. Then
power on the modem, followed by the IP Camera.
Cable/xDSL Modem
(ISP Provided)
Phone Line
or CATV
Internet
Internet
Public Line
Gateway or
Router at ISP
STATIC
Network Type :
1.
A static IP address received from your ISP such
as 24.107.88.125 (Example)
Internet Address :
2.
You need to assign an IP address to the IP Camera just as you do
with PC.
Subnet mask assigned from your ISP such as
255.255.255.240 (Example)
24.107.88.113 (Example)
Subnet Mask :
3.
Default Gateway :
4.
Use the assigned default gateway from your ISP
Use the 1st DNS Server from ‘Assigned IP
Address from My ISP’
Preferred DNS Server :
5.
Use the DDNS server
DDNS Server :
6.
This is the same site you will register later to utilize our DDNS
service.
80
Web Port :
7.
You may select any number between 1025 ~ 60000.
If you have not received any IP addresses from your ISP, contact
them to acquire the IP address of their DNS server.
DYNAMIC
Network Type :
1.
Use the DDNS server
DDNS Server :
2.
This is the same site you will register later to accommodate
dynamic IP from your ISP.
80
Web Port :
3.
You may select any number between 1025 ~ 60000.
as follows :
as follows :
Case C:
Static(Fixed) IP [Dedicated line directly
to the IP Camera]
Case D:
Dynamic IP + DSL/Cable Modem [Connected
directly to the IP Camera]
Camera
Camera
