Digital View M3-320, Руководство пользователя

Страница: 33 / 37

33
8
Dimension
The maximum thickness of the board is 19.3mm without add-on board (measured from bottom
of PCB to top of components, including any underside components & leads). We recommend
clearances of:
•
5mm from bottom of PCB - if mounting on a metal plate we also recommend a layer of
suitable insulation material is added to the mounting plate surface.
•
10mm above the components
•
3~5mm around the edges
Any of the holes shown above can be used for mounting the PCB, they are 3.2mm in diameter.
CAUTION: Ensure adequate insulation is provided for all areas of the PCB with special
attention to high voltage parts. (e.g. the inverter)
Page