Digital View M3-320, Руководство пользователя

Страница: 11 / 37

11
*An optional DVI to VGA adapter is required
•
Remote Ext. - Using the standard switch mount (p/n: 416101300-3) -
8 momentary buttons for OSD config and video playback control
(standard functions (in simple play mode) being: Play, Stop, Pause,
Next Track, Volume decrease, Volume increase, Mute). An optional
function control device is a custom-made switch mount connected to
the switches and buttons connectors (CN6 and CN3) with a maximum of
16 momentary buttons
•
Remote Ext. cable - The cables (p/n: 426631800-3) to the switches
and buttons connector should be of suitable quality and length so that
impedance does not affect performance. Generally lengths up to 1
meter (3 feet) should be acceptable.
•
LED (LED2) - The power LED indicator shows power is being supplied
to the M3-320. The Status LED indicates the status of SD card.
•
RS-232 port – Requires RJ-11 to DB-9 extend cable (p/n:
426894301-3) for RS-232 connection. This serial port supports barcode
scanner and RS-232 command control. The baud rate must be set to
(9600, n,8,1) and record suffix is set to CR (0DH).
•
USB – USB Host. Use USB memory stick for content update without
removing the SD card. The M3-320 will reset power when the USB stick
is detected inserting into the USB connector or removing from the USB
connector. (For the details of USB content update, please refer to the
Application note.)
•
DVI out – Supports DVI or VGA. Both DVI and VGA signal are sharing
the same connector. A DVI to VGA adapter is required if connect to
VGA.
Note : This DVI/VGA out is currently set to 1280x720 resolution which may not
be supported by all monitors. If the display looks reasonable but not perfect
please use the OSD settings of the monitor to adjust image position and tuning.
(sometimes called
Phase , H. size , H. Freq , etc) It may also be necessary to
adjust image size.
Page