Digital View M3-320, Руководство пользователя

Страница: 23 / 37

23
6.3 Start up
There are two kinds of start up mode (Start track mode and Sleep mode) can
be selected when writing playlist on to the Compact Flash Card by using DV
Studio Software.
6.3.1 Start track mode
If start track mode is selected in playlist, the pre-defined started track will be
played first when boot-up. For example, if track #5 is defined as started
track, then M3-320 will play track #5 after start up. (The default started track
is the first track in playlist)
Step by step:
•
Plug in the external power supply
•
Insert SD Card containing DV Studio Software exported “.pll / .prj” and
other media files. (e.g. .mpg, .avi, .jpg)
•
All filename should be in 16.3 format (i.e. xxxxxxxx.xxx) and avoid
using any illegal characters like “~”, “_”, “-“, etc
•
Switch the power 'on/off' switch to 'on'. (short jumper on PW1)
•
The track #5 (started track) will be played first.
•
Once the track #5 is finished, the first track in playlist will be followed
and played.
6.3.2 Sleep mode
If sleep mode is selected in playlist, a blank screen will be shown at the
beginning until the pre-defined button has been pressed. For example, if
button# 3 is defined in sleep mode, then M3-320 will play the 1 st track until
the button #3 is pressed.
Step by step:
•
Plug in the external power supply
•
Insert SD Card containing DV Studio Software exported “.pll / .prj” and
other media files. (e.g. .mpg, .mp3, .jpg)
•
All filename should be in 16.3 format (i.e. xxxxxxxx.xxx) and avoid
using any illegal characters like “~”, “_”, “-“, etc
•
Switch the power 'on/off' switch to 'on'. (short jumper on PW1)
•
Press 'button #3'.
•
The first track will be played.
Note: special specific track playback activated by assigned button can also be
performed in sleep mode - contact local sales office.
Page