Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00 : 13 Jan, 2021 (SP-1920-DUAL-HDMI_manual.doc)
Page
9 of 42
Utilities :
Menu lanugage : English / French / Spanish
Setup
4
Auto power : OFF / ON
ON – Enable soft power off function if absence of input signals
OFF – Disable soft power function
Auto Source Seek : On/Off (Default On) : Select Auto source select enable or disable.
Image Orientation
4
Set the image orientation on screen
Normal
H-Flip
V-Flip
#
HV-Flip
#
Gamma : 1.8 / 2.0 / 2.2 / 2.4 / 2.6 (Default 2.2)
FailOver On/Off (Default OFF) - See Appendix V in details.
Default power : On/Off
OSD
4
OSD Time Out : ON / 5 Sec / 15 Sec / 30 Sec (Default) / 45 Sec / 60 Sec : Adjust the
OSD menu timeout period
Transparent : 0% / 25% (Default) / 50% / 75% / 100% : Set OSD transparency
Reset to Factory Defaults
4
Restore back to factory default values.
Are you sure ? Yes / No
Software Update (USB) : Firmware upgrade
Hotkey
4
Hotkey 1 : Volume / Black Level / Contrast / Input Source / Aspect/Size / Saturation /
Image Orientation / Brightness / Off
Hotkey 2 : Volume / Black Level / Contrast / Input Source / Aspect/Size / Saturation /
Image Orientation / Brightness / Off
Brightness Setup :
Invert : OFF / ON : Invert for the backlight brightness
Control : D/A / PWM : Selection for voltage level dimming control / PWM dimming control
Frequency(Hz) : 100 ~ 440Hz in a step of 20
Min Level : 0 ~ 50% : Default the minimum backlight adjustment.
Light Sensor : Off/On
Audio :
Volume [0~100] : Default 50 : Increase/decrease volume level, total: 100 steps
Remark : # The OSD menu will not be flipped when set “H-Flip” or “HV-Flip”.
