Digital View 41776001X-3, Инструкция по эксплуатации

Страница: 25 / 42

Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00 : 13 Jan, 2021 (SP-1920-DUAL-HDMI_manual.doc) Page
25 of 42
Appendix II – RS-232 control protocols
RS-232 Serial control (Baud rate 9600, 8 bits, 1 stop bit and no parity
)
Physical connection :
Controller side
Computer side
Connector interface : CN8 Connector interface : Serial port
Mating connector : JST XHP-6 Mating connector : DB9 Female
PIN# Description PIN# Description
4 RS-232 Tx Data 2 RS-232 Rx Data
5 Ground 3 RS-232 Tx Data
6 RS-232 Rx Data 5 Ground
Remark :
(1) : RS-232 connection cable, 300mm P/N 426171800-3 can be ordered separately for connection.
Software connection :
The OSD function can be controlled through sending the RS-232 protocol.
The RS-232 program can be custom-made to fit for application or it can be used the serial control program, like Accessport,
Telix or Serial Utility program developed by DigitalView. Please contact your local support for information.
1. Commands to implement switch mount control buttons
Function Command Description Remark
Menu button 0xf7 Menu button pressed Button equivalent
Select-down
button 0xfa Select-down button pressed Button equivalent
Select-up button 0xfb Select-up button pressed Button equivalent
Right/+ button 0xfc Right/+ button pressed Button equivalent
Left/- button 0xfd Left/- button pressed Button equivalent
2. Parameter setting - immediate, relative, reset and query
Function Command Description Acknowledge (if enabled)
Volume control -
Left & right
channel 0x80, “a” | “A”,
nn | “+” | “-” |
“=”|
“r” | “R” |
“?” Set audio (L+R) volume =
value/increment/decrement
Display OSD indicator
Reset
Query volume
Volume control -
on/off (mute) 0x80, “m” | “M”,
“0” |
“1” |
“r” | “R” |
“O” |
“?”
Disable audio output.
Enable audio output.
Reset
Disable audio output without
“Mute” symbol
Query “0” - audio off (muted).
“1” - audio on.
“O”- audio off (without mute
symbol)
Black level control 0x81,
nn | “+” | “-” |
“r” | “R” |
“?”
“m”
“n”
“i” , ss, nn
“o”, ss, Set brightness =
value/increment/decrement
Reset
Query Current Source
Maximum query
Minimum query
Set, Source, value
Query, Source Brightness.
ss - reference by Input main
select(0x98)
Range : “0””0”-“6””4”
Default : “3””2”
5 4
6
3 1
7 8 9
Mating face of CN8 Mating face of RS-232 DB9 Male
5 4 6 3 1