Specifications subject to change without notice
© Digital View Ltd – Doc Ver 1.00 : 13 Jan, 2021 (SP-1920-DUAL-HDMI_manual.doc)
Page
14 of 42
Table 3 : DIP switch selection – SW4
Pos. #
Function
Description
1
Reserved
Reserved
2
Panel pixel format
OFF : Double Pixel
ON : Single Pixel
3
Panel selection
Default ON : Single / Double pixel LVDS panel (controlled by SW4
position 2)
4
LVDS data mapping select
(Refer to Table 2)
If SW4 position 5 = OFF (8 bit)
OFF : Mapping B
ON : Mapping A
Please adjust to get the correct picture. See as Appendix I for details of
mapping of A and B.
If SW4 position 5 = ON (10 bit)
OFF : JEIDA (LVDS panel)
ON : VESA (LVDS panel)
Please adjust to get the correct picture. See as Appendix I for details of
mapping of VESA and JEIDA.
5
Output LVDS display mode selection
OFF : 8 bit
ON : 10 bit
6
Reserved
Reserved
Support "Resolution default by EDID" for different resolution panel.
The controller will set the preferred timing based off the dip switch setting (SW3 position 1-7)
selection, but also be able to go higher to 1920x1200. For example, if the panel is a 1024x768 and the
dip switch setting are set for 1024x768. The preferred EDID resolution should be 1024x768. It should
also have the capability to set the max resolution to 1920x1200.
