Digital Projection TITAN sx+-500, Руководство пользователя

Страница: 66 / 120

Rev C March 2008 page 4.24
4. Controlling the projector Digital Projection
TITAN sx+-500
User Manual
Notes
Some menu controls can be
accessed directly using the
control keys (see earlier in this
section).
When using the menus, press
OSD or to hide or
reveal the On-Screen-Display.
Geometry Menu
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
Aspect Ratio selection can be
found in both the Picture and
Geometry menus.
When User is selected, the
Aspect Ratio needs to be set in
the User H Aspect and V
Aspect (see next page).
Geometry menu
To return to the main menu, press up to three times.
From the main menu:
•
Press and until Geometry is highlighted.
Press to open the Geometry menu. The blue highlight moves to the first
item in the menu.
Horizontal Position
•
Press and to select H Position .
Press and to adjust the slider.
Vertical Position
•
Press and to select V Position .
Press and to adjust the slider.
Aspect Ratio
Press and to select from:
Fill This will best fit the incoming source to fill either the height or
width without changing the aspect ratio of the source.
User Aspect
1.33:1 (4:3)
1.78:1 (16:9)
2.35:1 (Scope)
1.66:1 (Vista)
1.85 (Flat)
Native The image will be displayed pixel for pixel. The image will be
centred, with a black border if smaller than native resolution or
cropped if larger.
Input
Picture
Geometry
Colour
Setup
Information
H Position
V Position
Aspect Ratio
User H Aspect
User V Aspect
Keystone
Phase
Resolution
Blanking
1.85:1 (Flat)
128
64
500
500
0
127