manualshive.com logo in svg

Digital Projection TITAN sx+-500, Руководство пользователя

Поделиться
Скачать
Digital Projection TITAN sx+-500 Скачать руководство пользователя страница 34

Rev C     March 2008      page 2.14

2. Installation

Digital Projection 

TITAN sx+-500

 User Manual

Notes

When stacking projectors, the
stack MUST be vertical, to
ensure that the stresses are
distributed to all frame
couplings.

Make sure that the surface,
ceiling or rigging that is to
support the projector is
capable of supporting the
combined weight of all the
projectors and lenses 

(see

specification for weights)

.

Do not place heavy objects
on top of the projector
chassis. Only the chassis
corners and the rigging frame
are capable of withstanding
the weight of another
projector.

Do not try to stack more than
3 projectors.

Separate backup safety
chains or wires should
always be used for each
projector.

Stacking projectors

The rigging frame is capable of supporting the weight of up to two other projectors,
using the built-in frame couplings. The projectors can be stacked on top of each
other, or suspended below each other.

•

Carefully lower each projector down onto the top of the others, making sure that

all four frame couplings engage fully.

•

Fit a locking pin into each coupling. A ball in the end of the pin prevents the pin

from falling out – to insert or remove a locking pin, press the button on the end of
the pin to release the ball.

•

Align the images from the projectors, following the instructions on the previous

page and those in section  3. Getting started, Adjusting the lens and Adjusting
the projected image.

Frame
couplings

Locking
pin

Содержание TITAN sx+-500

























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды