Digital Projection TITAN sx+-500 Скачать руководство пользователя страница 54

Страница: 54 / 120

Rev C March 2008 page 4.12

4. Controlling the projector

Digital Projection

TITAN sx+-500

User Manual

Notes

For more information about
input modes and input presets,
see earlier in this section, Input
modes and settings.

A preset can be applied only to
the same mode for which it was
created. If the detected input
mode does not match, then
settings from the mode history
or mode library will be applied.

For more information about
input modes, see Input modes
and settings. earlier in this
section.

Input Presets

Recall

•

To recall a set of modal settings that have been saved, press and hold

whilst pressing the lettered key

A – S

The projector will switch to the saved input source, and redetect the input mode

before applying the saved modal settings.

Save

•

To save the current input source, mode and modal settings, press and hold

, whilst pressing the lettered key

A – S

If this Preset has been used before, and the Input source has been changed,

then the following message will be displayed.

Press

and

to select either

Cancel

Press

to confirm your selection.

The modal settings will be saved to the selected preset, and the following

message will be displayed.

Содержание TITAN sx+-500

























































































































Результаты поиска

Содержание TITAN sx+-500

Отзывы:

Бренды по названию

Популярные бренды

Digital Projection TITAN sx+-500, Руководство пользователя

Результаты поиска

Содержание TITAN sx+-500

Отзывы:

Бренды по названию

Популярные бренды