Digital Projection morpheus 7000hdi, Руководство пользователя

Страница: 8 / 12

8
7. STATUS LED's
Power Status LED
Power LED Action
RED Projector in Standby
GREEN Projector in power up cycle or projector running
YELLOW Projector in power down cycle
Status LED's
Status LED Steady - ON Flashing or Off
LAMP DOOR Lamp door closed Lamp door open
FANS Fans OK Fan failure
LAMP Lamp struck OK “ON” Not struck / Lamp off
VIDEO SIGNAL Valid Video Signal detected No video or Invalid signal detected
FORMATTER Formatters Initialised and Operating
Formatter failure - may fl ash during
video signal change
BALLAST TEMP Ballast temperature OK
Ballast temperature too high
>105
˚ C
READY Projector running/ready for power on Cool down cycle in progress
SHUTTER Shutter open Shutter closed
7
Quick Power down
If the projector is in the 5 MINUTE POWER DOWN sequence, pressing the SOFT POWER switch again
(1/2 second or more) will initiate the 60 SECOND POWER OFF sequence.
To cancel 5 MINUTE POWER DOWN press the SHUTTER switch. OR If the IR remote is enabled - press
the OPEN button on the remote control which will open the SHUTTER and cancel the 5 MINUTE POWER
DOWN. The STATUS LED will turn GREEN.