Digital Projection morpheus 7000hdi, Руководство пользователя

Страница: 5 / 12

5
Unpacking
Save the original shipping carton and packing material. When you need to ship the product. The
original packing carton can provide the maximum protection.
Ambient Lighting - for best quality pictures
In order to obtain the best quality for the projected image, it is essential that the ambient light which is
allowed to fall on the screen be kept to an absolute minimum.
When installing the projector and screen, care must be taken to avoid exposure to ambient light
directly on the screen. Avoid adverse illumination on the screen from direct sunlight or
fl uorescent
lighting fi xtures.
The use of controlled ambinet lighting, such as incandescent spot light or a dimmer, is recommended
for room illumination. Where possible, care should also be taken to ensure that the
fl oors and walls of
the room in which the projector is to be installed are non-re fl ecting, dark surfaces. Brighter surfaces
will tend to re fl ect and diffuse the ambient light and hence reduce the contrast of the projected image
on the screen.
1. CAUTION
1
2. MAINTENANCE
2
The air fi lters is to prevent dust from entering the projector and to keep good air circulation.
NOTE:
Be sure to contact the dealer each 100 hours about the replacement of the air fi lter.
If the air fi lter is heavily covered by dust, it can cause overheat and fi re or other damage. The air fi lter is a consum-
able part. Please contact your dealer for details about c hange the air fi lter.
Filter replacement
Be sure to turn off and unplug the projector before you change the fi lter
1.
Remove the screws
2.
Take out the fi lter cover
3.
Take the fi lter out.
4. Install new fi lter. Replace the fi lter cover and screws.